Star Wars Model LED & Fibre Optic Millennium Falcon Light Kit LARGER SET BLUE SUBLIGHT DRIVE UK Mains Powered

Dispatch Time:
This light kit is subject to a 5 working day dispatch time.

Prewired LED Light Kit

Millennium Falcon - Larger Set With Blue Sublight Drive Lighting

This is an upgrade set that fits the larger Falcon models or toy conversions  (a Hasbro base was used to construct the set, which is roughly 70cm x 50cm).

As long as your model base is within these dimensions, this kit should be ideal. Also take into consideration the requirement to conceal the wiring within the model.

The set is intended to recreate the same layout as our popular 1:72 Revell set, and includes the same 3mm led colour scheme. If you view the photos, the model used is the Revell to give you an idea of the lighting layout.

Please note: fitting instructions are not provided with this set.

The 180mm LED clusters are broken down into four main sections, each labelled front left, front right, rear left, rear right (as you look down at the inside of the base) for ease of fitting. Each of these sections are on a 25cm wire from the main terminal block.

The two front cool white lights are upgraded to 5mm flat type ultra bright LEDs, on 50cm wires.

The cockpit lighting section is fitted on a 50cm wire and is upgraded to two colour changing fibre optic LEDs (each with x5 1mm / 100mm fibres), a 5mm ultra violet LED and a 3mm warm white LED.

The separate sublight drive lighting section has considerably more LEDs, 42 in total, consisting of two 21 smd LED strips (both 35cm long) for nice even light output. This set is fitted with BLUE strips as shown.

This light kit is also available as a battery powered set for use when the model needs to be made portable.

This light kit is listed HERE

The light kit is fitted with screw terminal blocks, making it easier to take apart and install as required.

Electrical Safety

The set is run by a UK mains transformer, suitable for 240V 50/60Hz supply

The mains transformer provides a 9V 2A supply. Ensure all power sources are switched off and disconnected when installing the set to prevent the possibility of short circuit damage to the transformer.

For use in a dry indoor location only. Item is not waterproof.

Use only the transformer supplied with the light kit. The transformer is sealed and CE rated, and cannot be modified.

Suitable for adult use by ages 18 years and above only.


Summary Of Light Kit Contents

Our light kits are completely pre-wired and ready to fit unless otherwise stated in the listing.

Main Lighting Circuit
x2  5mm Ultra Bright Flat Top Cool White LEDs
x14  3mm Ultra Bright Warm White LEDs
x8  3mm Ultra Bright Red LEDs
x3  3mm Ultra Bright Cool White LEDs
x2  Red / Green / Blue Slow & Fast Fibre Optic LEDs (each with five 100mm long 1mm diameter fibres)

These are split into groups to make it easier to replicate the original Revell layout as shown, however the set can be fitted to the model makers preference.

Sublight Drive Engine LED Strip Circuit
x2  Neon Blue SMD LED Strips
Each strip has 21 LEDs and is 35cm long.

Power Lead
Single 1 metre power wire lead running to transformer barrel pin connector.