x1 5mm Static Ultra Violet Led, on minimum 160mm wires
x1 5mm Flickering Yellow Led, on minimum 160mm wires.
x3 Flickering Yellow Micro Leds, individually on 75mm wires, each branching off from a 300mm single wire.
500mm Power wire.
9v Battery box with built in switch.
As with all light kits, you will need to make modifications to your model.
No fitting guide is supplied with this kit, as installation is straight forward and can be adapted to the model makers requirements.
It is advised that the 3mm yellows & 5mm ultra violet are positioned at the rear of the model to shine either along the length of the decks, or used as uplighters in the deck floors, depending on how much light output is needed.
A combination of the 5mm flickering yellow and 3mm static yellow, or 5mm ultra violet could be used for the rear cabins.
The three flickering yellow micro leds are intended for use in the base of the three rear lanterns, with the main wire to these being run centrally along the rear cabin wall.