Star Wars Model Fibre Optic Large Scale Millennium Falcon FRONT COCKPIT CONTROLS SET

IMPORTANT

Please be aware - this item is subject to 5 Working Day Dispatch as it handmade in our workshop and not a bought out item. This is necessary in order to allow me time to design and produce other light kits, and also to cover the website orders as well as the ebay ones.

Your item will be posted within the five working days, starting from the day of cleared payment.

Thank you for your valued understanding and support.

Chris – CJ Models

Led & Fibre Optic Light Kit
Star Wars - Large Scale Millennium Falcon
FRONT COCKPIT CONTROLS SET

This light kit has been designed and built primarily for use with large scale Millennium Falcon models eg Hasbro, Deagostini etc. Please check the dimensions of your model for suitability.

The set (along with the majority of our light kits) is completely pre-wired and ready to install. No electronic or assembly work required, just drill 1mm fitting holes as required in your model for the fibres.

This is a great quality light kit designed to recreate, as near as possible, the FRONT COCKPIT CONTROL PANEL of the Millennium Falcon cockpit.
The set has an operating voltage of between 4v and 12v dc maximum, and as standard is supplied with a 9v battery clip.
Using the screw terminal connector, the set could be added to or used to expand our other light kits.

Fibre Bundle Colours & Intended Uses As Follows:

The set features a number of 1mm fibre optic bundles. Each fibre strand has a minimum 100mm usable length. The wire loom to each fibre bundle measures 160mm

Included for the front control panel:
x1   5 strand static cool white
x1   5 strand flashing cool white
x1   5 strand static blue
x1   5 strand flashing blue
x1   5 strand static red


I've designed this set to recreate the movie original as near as possible in the available space in most large scale models. It gives the model builder as much choice as possible as to which lights need to be included depending on how detailed the model build is.

We use 1mm best quality fibre optic
which is easier for the model maker to work with.

The fibre optics can carefully be cut to size to fit the model. Wire lengths can also be altered by the model maker if necessary.

Requires x1 9volt battery (not included).

A video of the set is available on both our
Instagram Page:
www.instagram.com/captainjacksmodels

Blueprint photo courtesy of the Build The Millenium Falcon project.