Reserved Listing For Alberto

Ideal for model making, signage, craft and design use.

LED filament is a thin flexible string of micro leds that give off a rich colour.

It performs better than EL Wire, in that it is completey silent in operation and uses little power.

Each filament is fitted with 300mm of 0.5mm diameter (30AWG) tinned copper wire - black: negative & red: positive. 

On this colour filament, both wires are attached to the strip at the one end.

The filamaent has been pre-soldered and resistored to allow operation between 3v and 12v DC maximum.

Please note that the length of the filament itself cannot be shortened.

A great effective LED unit that is easy to work with.

Specification:

Quantity: 3 filaments supplied

Width: 1.5mm

Filament Length: 100mm

Plus 300mm 0.5mm negative wire & 300mm 0.5mm positive wire lead

Operating Voltage: 3v to 12v DC maximum (with fitted resistor)

Current Draw: 20mA with fitted resistor