Star Wars Model Led & Fibre Optic Millenium Falcon Light Kit - LARGER SET - UK Mains Supply Only
For use only on UK mains power using transformer supplied.
Out of stock.
Dispatch Time: Please be aware when ordering that due to workload, there may be up to a maximum of 5 working day dispatch on this item. I can usually dispatch most orders sooner, but if you are working to a client deadline, please be aware of this. Thanks
Led & Fibre Optic Light Kit Star Wars - Millennium Falcon LARGER MODEL VERSION
UK Mains Powered Only
This is the upgrade set that fits the larger Falcon models (a Hasbro base was used to construct the set, which is roughly 70cm x 50cm).
As long as your model base is within these dimensions, this kit should be ideal.
The set is intended to recreate the same layout as our popular Revell set, and includes the same 3mm led colour scheme. If you view the photos, the model used is the Revell to give you an idea of the lighting layout.
Please note: fitting instructions are not provided with this set.
The 180mm led clusters are broken down into four main sections, each labelled front left, front right, rear left, rear right (as you look down at the inside of the base) for ease of fitting. Each of these sections are on a 25cm wire from the main terminal block.
The two front cool white lights are upgraded to 5mm flat type ultra bright leds, on 50cm wires.
The cockpit lighting section is fitted on two 50cm wires and is upgraded to two colour changing fibre optic leds (each with x5 100mm fibres), x2 3mm cool white leds and two 3mm warm white leds
The separate booster lighting section has considerably more leds, 42 in total, consisting of two triple filament 21 smd led strips (both 35cm long) for nice even light output.
There is also an expansion connector so that you can add more fibre optic / round type leds to the main set -
The set is run by a mains transformer, suitable for use on a UK power supply only.
The light kit is fitted with screw terminal blocks, making it easier to take apart and install.
The main power lead running to the transformer connector is 1metre long, with an additional 1metre wire on the transformer unit itself.
We use 1mm fibre optic for this set.
The fibre optics can carefully be cut to size to fit the model. Wire lengths can also be altered by the model builder if necessary.
Summary Of Light Kit Contents
Main Lighting Circuit x2 5mm Ultra Bright Flat Top Cool White Leds x16 3mm Ultra Bright Warm White Leds x8 3mm Ultra Bright Red Leds x5 3mm Ultra Bright Cool White Leds x2 Red / Green / Blue Slow & Fast Fibre Optic Leds (each with five 100mm long 1mm diameter fibres) x1 Expansion screw terminal connector to easily add other lights if needed.
Booster Strip Circuit x2 Neon Blue SMD Led Strips Each strip has 21 triple filament leds and is 35cm long.
If adding extra circuits to the set from our store, please contact us on your choice of item and we will ensure that these are wired suitably to balance with the rest of the main light kit itself.
This light kit is intended for adult use only, by competent persons with suitable electrical safety knowledge. The transformer unit is a factory sealed, tested and rated low voltage unit, however as with any appliance, mains electricity can be dangerous if misused. Always ensure that the set is fully disconnected from the supply when working with this product.
This set is designed for indoor use only. Please contact us if unsure of any aspect of the use of this item.